Adirondack rocking chair
An Adirondack chair on curved rockers: a slatted seat that slopes back, a tall back with a rounded top, and wide flat arms. It is 31 inches wide and 38 inches from front to back.
Every joint is screwed, so the challenge is in the shapes and angles rather than the joinery: the curved rockers, the rounded tops of the back slats, and a seat set at 15 degrees.
Open it to see the shape and angle of each part before you cut.
GrainDraft is meant for a computer or tablet. Open it here, or send yourself this page and open the project on a computer.
Opening asks first and saves the project you have open to your Project shelf. The copy you open is yours to change; this listing stays as it is.
Check the dimensions before cutting anything — you did not make this project.
What is in the model
| Overall size | 31 × 38 × 38 in width × depth × height |
|---|---|
| Parts | 28 |
| Board feet | 27.57 |
| Wood | Any wood |
| Joints used | Screw |
| Estimated lumber cost | $165.41 a rough estimate at a placeholder price, because no wood has been chosen; price it for the wood you buy |
Shared under CC BY 4.0. You may build it, change it and share it, including commercially, as long as you give credit. Suggested credit: “Adirondack rocking chair” by GrainDraft, GrainDraft gallery, graindraft.com/gallery/adirondack-rocking-chair/. Offered as it is, with no promise that it suits your wood, tools or use: see the gallery terms.
